Astric® Universal Driver
The Astric® Universal Dimmable Driver is capable of ultra-smooth dimming for any type of project. Flicker-free control can be achieved through a variety of technologies such as 0/1-10, PWM, TRIAC, Magnetic Low Voltage (MLV), Electronic Low Voltage (ELV), Potentiometer, 10V PWM Dimming, and On/Off Switching.These drivers are enclosed in their own junction boxes and are IP66 Wet Location, UL 8750 Rated for reliable, long-lasting use.
Specifications
| Product SKU | Input Voltage | Rated Current | Rated Power | Class 2 Rating | Efficiency (Typ.) | AC Current (Max) | Weight | Power Factor |
|---|---|---|---|---|---|---|---|---|
| AST-UNV-30W-24VDC | 100-277VAC | 1.25A | 30W | Yes | Up to 80% | 0.5A@100VAC | 2.1 lbs (0.95 Kg) | 0.99@120VAC 0.95@277VAC |
| AST-UNV-60W-24VDC | 100-277VAC | 2.5A | 60W | Yes | Up to 85% | 0.5A@100VAC | 2.4 lbs (1.1 Kg) | 0.98@120VAC 0.95@277VAC |
| AST-UNV-96W-24VDC | 100-277VAC | 4A | 96W | Yes | Up to 86% | 1.3A@100VAC | 3.02 lbs (1.37 Kg) | 0.98@120VAC 0.95@277VAC |
| AST-UNV-120W-24VDC | 100-277VAC | 5A | 120W | No | Up to 84% | 1.7A@100VAC | 3.02 lbs (1.37 Kg) | 0.98@120VAC 0.95@277VAC |
| AST-UNV-200W-24VDC | 100-277VAC | 8.33A | 200W | No | Up to 88% | 2.3A@100VAC | 4.17 lbs (1.89 Kg) | 0.98@120VAC 0.95@277VAC |
| AST-UNV-300W-24VDC | 100-277VAC | 12.5A | 300W | No | Up to 92% | 3.4A@100VAC | 4.85 lb (2.2 Kg) | 0.99@120VAC 0.95@277VAC |
| AST-UNV-C192W-24VDC | 100-277VAC | 2x4A | 2x96W | Yes | Up to 89% | 2.3A@100VAC | 5.07 lb (2.3 Kg) | 0.99@120VAC 0.94@277VAC |
| AST-UNV-C288W-24VDC | 100-277VAC | 3x4A | 3x96W | Yes | Up to 91% | 3.4A@100VAC | 5.51 lb (2.5 Kg) | 0.99@120VAC 0.95@277VAC |
Swipe the chart to the left for more information.
Technical Information
Voltage Tolerance:0.5V
Voltage Regulation:0.5%
Dimming Range:0-100%
Deration Recommendation:80%
Minimum Load:10%
Frequency Range:47-63 Hz
THD (Typ.):<20%
Short Circuit:Shuts down output voltage. Re-powers on to recover after the fault condition is removed.
Overloading:≤120%
Overheating: 212ºF ∓ 18ºF (100ºC ∓ 10ºC) Driver shuts down when these limits are exceeded. An automatic reset will occur after the temperature falls back within acceptable limits.
Working Temperature:-40ºF ~ 140ºF (-40ºC ~ 60ºC)
Working Humidity:20 ~ 90%RH. Non Condensing
Temp Coefficient:∓0.03%/ºC [32ºF ~ 122ºF (0 ~ 50ºC)]
Certifications:UL (#E520351) Listed, RoHS Certified, Conforms to FCC Standards
Maximum Voltage:I/P-O/P:1.88KVAC
Load regulation:1%
Isolation Resistance:I/P-O/P:100MΩ/500VDC/25ºC/70%RH
EMC Emission:FCC Part 15B
PWM Frequency:400Hz
Ingress Protection:IP66
Warranty:7 years
